SHF6005/US-036
 
  Features:
  ˇ´All SH-7000 (including SHF,SHG) overlocks are designed
   for easy-fit-in of the thread trimmers,only a few parts are
   required for replacement when installing.
  ˇ´Trimming mechanisms are linkaged directly to the machine
   itself.Trimming motions are driven simultaneously as the
   sewingmachine runs.
  ˇ´All under mentioned thread trimmers should be applied
   together with one of the following vacuum/venturi devices.
    ˇ´SV-001:Vacuum device.
           (blower motor with drum & hose).
    ˇ´SV-002:Vacuum device.
    (blower motor & waste basket compacted in one iron case)
    ˇ´CV-006:Venturi device
           (whenever compressed air is available).
  ˇ´US-036:Under suction type thread trimmer (horizontal type).
           When the chain-off thread is sucked in horizontally
           behind the needle,then trimmed by the blades.
  ˇ´M/CS with #512 Stitching are not suitable for installing
    any kind of suction type thread trimmer,such as
    SH-7004-B33-M12, SH-7004-B53-H12