|
| Features: |
|
ˇ´All UH-8000 overlocks are designed for easy-fit-in of the thread
trimmers,
only a few parts are required for replacement when
installing.
ˇ´Trimming mechanisms are linkaged directly to the machine itself.
ˇ´Trimming
motions are driven simultaneously as the sewing
machine runs.
ˇ´All under mentioned thread trimmers should be applied together
with one of
the following vacuum/venturi devices.
ˇ´SV-001:Vacuum device.(blower motor with drum & hose)
ˇ´SV-002:Vacuum device.
(blower motor & waste basket compacted in one iron case)
ˇ´CV-006:Venturi device.(whenever compressed air is available)
ˇ´US-040:Under suction type thread trimmer (horizontal type).
When the chain-off thread is sucked in horizontally behind the
needle,then
trimmed by the blades.
ˇ´M/CS with #512 stitching are not suitable for installing any kind
of suction
type thread trimme. |
|
|
