Model:
 
NTD67: Direct Drive Mini Servo Motor Connected With Crankshaft Direct With Safety Switch.
NT67: Clutch Motor Mounted Underneath The Table Driven By Motor Belt.
NTD68: 4-Needle, 6-Thread Flat-Seamer, Feed-Off-The-Arm Machine
NTD69: 4-Needle, 6-Thread Flat-Seamer, Feed-Off-The-Arm Machine
Application Code:
 
01: One side cut (right side cut) with top coverstitch
 
     
 
   
03: One side cut (right side cut) without top coverstitch for attaching binging tape on joint seam.
 
     
 
   
03A: Two sides cut without top coverstitch equipped with wide knife for attaching binging tape on joint seam.
 
     
 
   
12: Two side cut with cover stitch suitable for medium to heavy materials.
 
     
 
   
Subclass Model:
Modified Partially Due To Special Requirements
   
Material Weight:
M :Medium to light weight material with standard knife
H :Medium to heavy materials with wide knife
   
Distance Of Needle:
 

5→Needle Distance 5.2 mm
6→Needle Distance 6.0 mm

Installation :
TT-S36 Direct Drive Type With Safety Switch.
HT-S21 Clutch Motor Mounted Underneath Table Type.
   
Optional Devices:
TT-S36 Chain removal assembly
  CV011(Φ19)
  CV012(Φ25)
  CV013(TC用Φ19)
  CV014(TC用Φ25)
  CV015(Φ19)
  CV016(Φ25)
  CV021(TC用Φ19 Φ25)
  Vacuum Chip Collection Device
  SV004(PFE用Φ19)
  SV005(PFE用Φ25)
  One Touch Type Tape Cutter
  TC012
  TC013
  AL013
  Pneumatic type foot lifter
  PFE06
  Electric type foot lifter
HT-S21 Chain removal assembly
  SV004(PFE用Φ19)
  SV005(PFE用Φ25)