|
MT4500 MODEL NUMBERING SYSTEM
1.MODELSˇ@
ˇ@ ˇ@
2.MOVING ˇ@ ˇ@ ˇ@
3.HOW TO INSTALL THE MACHINE
3-1:How to install MT series
3-2:How to install the tension stand of MT-4506 / MT-4509
/ MT-4512
ˇ@ˇ@MT-4513 / MT-4517 / MT-4523.
4.BEFORE OPERATION
5.NEEDLES
6.CAUTION IN SETTING UP MOTOR
BELT
7.LUBRICATION
8.ASSEMBLING THE TENSION STAND
OF MT-4500 / MTS-4500
9.ASSEMBLING THE TENSION STAND
OF MT-4000
10.THREADING THE MACHINE
11.THREADING DIAGRAM FOR MT/MTS
4501
12.THREADING DIAGRAM FOR MT/MTS
4504
13.THREADING DIAGRAM FOR MT/MTS
4506
14.THREADING DIAGRAM FOR MT/MTS
4509
15.THREADING DIAGRAM FOR MT/MTS
4512
16.THREADING DIAGRAM FOR MT4001
17.THREADING DIAGRAM FOR MT4004
18.THREADING DIAGRAM FOR MT4006
19.THREADING DIAGRAM FOR MT4009
20.THREADING DIAGRAM FOR MT4012
21.ADJUSTING THE STITCH FORMATION
21-1:Thread tension adjustment
21-2:Position of the needle thread eyelet
21-3:Adjusting the needle thread guard
22.TIMING OF THE LOOPER TO THE
NEEDLE
22-1:Positioning the looper and the looper rocker
22-2:Looper left to-right movement
23.TIMING OF THE RETAINER LOOPER
23-1:Installing the retainer looper
23-2:Timing of the retainer looper to the needle
24.ADJUSTING THE NEEDLE GUARD
25.ADJUSTING THE FEED DOG &
STITCH LENGTH
25-1:Feed dog height & tilt
25-2:Stitch lenght
26.ADJUSTING THE PRESSER FOOT
ˇ@
26-1:Presser foot pressure
26-2:Position of the presser foot and foot lift
27.ADJUSTING THE REAR PULLER
DEVICE
27-1:Manual lever and position of the stopper
27-2:To adjust the puller pressure
28.CLEANING THE MACHINE
29.MT SERIES TABLE CUT-OUT
29-1:Stadard TypeˇGˇ]Non-Submerged Typeˇ^
29-2:Semi-Submerged Type
IMPORTANT SAFETY INSTRUCTION
|
