MENU
MENU
Home/products/Overlock/UH series/UH9000F, UHD9000F Series/Overlock_Optional Device

Overlock_Optional Device

Tubular Extending Roller Set

  • Tubular Extending Roller Set

TR

TR□ Picture Perimete Directions Application Parts List
TR011 ・[Picture] ・[Perimete]800~1100 mm ・[Directions]- ・[Application]UH□93 ・[Parts List]
TR017 ・[Picture] ・[Perimete]800~1500 mm ・[Directions]- ・[Application]UH□93 ・[Parts List]
TR019 ・[Picture] ・[Perimete]600~1500 mm ・[Directions]- ・[Application]UH□93 ・[Parts List]
TR012 ・[Picture] ・[Perimete]500~800 mm ・[Directions]- ・[Application]UH□93 ・[Parts List]
TR023 ・[Picture] ・[Perimete]300~800 mm ・[Directions]- ・[Application]UH□93 ・[Parts List]
TR033 ・[Picture] ・[Perimete]500~800 mm ・[Directions]Pnuematic Roller Set Semi-submerged Table ・[Application]UH□93 ・[Parts List]
TR034 ・[Picture] ・[Perimete]500~800 mm ・[Directions]Pnuematic Roller Set Non-submerged Table ・[Application]UH□93 ・[Parts List]
  • Crew Collar Sewing Guider/ Tubular Extending Roller Set

TR021

Picture Directions Parts List video
TR021
(With TR019)
 ・[Picture] ・[Directions]Pneumatic fabric guide, which is controlled by knee switch. Before the end of sewing, the guide is pulled off and the ring type sewing can be finished. ・[Parts List] ・
  • Crew Collar Sewing Guider/ Tubular Extending Roller Set

TR025

Picture Picture Directions Parts List
TR025
(With TR019)
 ・[Picture] ・[Picture] ・[Directions]Pneumatic fabric guide, which is controlled by knee switch. Before the end of sewing, the guide is pulled off and the ring type sewing can be finished. ・[Parts List]
  • Ribbed Cuff Attaching/ Tubular Extending Roller Set

TR037

Picture cloth Directions Parts List video
TR037 ・[Picture] ・[cloth] ・[Directions]Pneumatic tubular extending roller pulls downward during sewing. At the end of sewing, thread releasing, trimming, and material unloading are done automatically. ・[Parts List] ・
  • Elastic Band Joining/ Tubular Extending Roller Set

TR030

Directions Parts List video
TR030 ・[Directions]Pneumatic tubular extending roller, with UHD9022F/BL 2-thread overlock, pulls left during elastic band ring length measuring. Before sewing, the ring is released without tension. ・[Parts List] ・
  • Suction Type Thread Chain Trimmer Set

SS

  • Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut.
Directions Application Parts List
SS033 ・[Directions]Side Suction Type 3, 4-thread overlock ・[Application]UH9000, UHD9000 ・[Parts List]
SS034 ・[Directions]Side Suction Type 3, 4-thread overlock ・[Application]UH9300, UHD9300 ・[Parts List]
SS037 ・[Directions]Side Suction Type 3, 4-thread overlock ・[Application]UHU9000, UHU9100, UHF9000, UHF9100 ・[Parts List]
SS038 ・[Directions]Side Suction Type 3, 4-thread overlock ・[Application]UHU9300, UHF9300 ・[Parts List]
SS051 ・[Directions]Side Suction Type 3, 4-thread overlock ・[Application]UHD9022F, UHD9024F ・[Parts List]
  • Suction Type Thread Chain Trimmer Set

US

  • Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut.
Directions Application Parts List
US040 ・[Directions]Under Suction Type, 5, 6-thread overlock, thick fabric is more suitable. ・[Application]UH9000, UHD9000 ・[Parts List]
US041 ・[Directions]Under Suction Type, 5, 6-thread overlock, thick fabric is more suitable. ・[Application]UHU9000, UHU9100, UHF9000, UHF9100 ・[Parts List]
  • Central Venturi Device Set(Mechanical Valve)

CV

Connected to air compressor, controlled by motor pedal. Step forward to sew and to make front and rear air suction. Step backward to raise the presser foot.

Pedal Connection : Mechanical Valve + Clutch Motor

  •  Front Suction: fabric waste
  •  Rear Suction: thread trimmer
  •  Presser foot lifter

Item No.

Front SuctionRear SuctionFoot LifterApplication
UH9000		Application
UHF9000		Application
UH9300		Application
UHF9300		Parts List
CV08A-✓-●●●●●
CV08B✓✓-●●●
CV28B✓✓-●●●
CV08C-✓✓●●●
CV38C-✓✓●●●
CV08D✓✓✓●●
CV28D✓✓✓●●
CV38D✓✓✓●●
CV48D✓✓✓●●
CV08E--✓●●●
CV38E--✓●●●
CV08K✓--●●●
CV28K✓--●●●
  • Central Venturi Device Set(Solenoid Valve)

CV

Connected to air compressor, controlled by motor pedal. Step forward to sew and to make front and rear air suction. Step backward to raise the presser foot.

Pedal Connection : Solenoid Valve + Servo Motor Speed Controller

  • Front Suction: fabric waste
  • Rear Suction: thread trimmer
  • Presser foot lifter

Item No.

Front SuctionRear SuctionFoot LifterApplication
UHD9000F		Application
UHU9000		Application
UHD9300		Application
UHU9300		Parts List
CV08E-3--✓●●●
CV58E-3--✓●●●
CV08F-2✓✓✓●●
CV28F-2✓✓✓●●
CV58F-2✓✓✓●●●
CV68F-2✓✓✓●●●
CV08G-2✓✓-●●●
CV28G-2✓✓-●●●
CV08H-2-✓✓●●●
CV58H-2-✓✓●●●
CV08I-2-✓-●●●●●
CV08M-2✓--●●●
CV28M-2✓--●●●
  • Blind Hemming Guide

BH

Picture Directions Application Parts List video
BH ・[Picture] ・[Directions]3-thread blind hemming. ・[Application]UH90, UHD90, UH93, UHD93 ・[Parts List] ・
  • Thread Tension Releaser

BL

Picture Directions Application Parts List
BL ・[Picture] ・[Directions]Connected to presser foot lifter lever. As pushing the pedal, the thread tension nut is opened, and the needle thread is released. ・[Application]BL073(3-thread)
BL074(4-thread)		 ・[Parts List]
  • Back Latch Device

BT

Picture Directions Parts List
BT084, BT086 ・[Picture] ・[Directions]At the beginning of sewing, wrap the pre-clamped thread end into the bottom of the overlock seam. At the end of sewing, pull the thread end into BT device to cut and clamp the thread end. BT084 and BT086 are optional for different sewing gestures. ・[Parts List]
  • Pocket Tape Binding Device

BD

Picture Directions Stitch Application Tape Folder Entering Width Parts List
BD070 ・[Picture] ・[Directions]trouser pockets ・[Stitch]Stitch 516 ・[Application]UH9055F UHD9055F ・[Tape Folder Entering Width]openings is 9.5mm (3/8”) ・[Parts List]
BD081 ・[Picture] ・[Directions]Casual trousers, jeans pockets. ・[Stitch]Stitch 401 ・[Application]UH9034F UHD9034F ・[Tape Folder Entering Width]openings is 30mm, 25mm
Export width 6.4mm		 ・[Parts List]
  • Gathering Device

GC

Picture Description Stitch Application Parts List
GC060 ・[Picture] ・[Description]Shirring device GC060 presses the lower fabric to increase feeding, which makes the upper fabric flat, and the lower fabric is irregularly wrinkled. ・[Stitch]Stitch 516 ・[Application]UH9044F, UHD9044F, UH9045F, UHD9045F ・[Parts List]
GC061, GC061A ・[Picture] ・[Description]Shirring device GC061, GC061A presses the lower fabric to increase feeding, which makes the upper fabric flat, and the lower fabric is irregularly wrinkled. ・[Stitch]Stitch 516 ・[Application]UH9074F UHD9074F UH9075F UHD9075F ・[Parts List]
  • Edge Guide Device

EG

Directions Parts List
EG006 ・[Directions]3 and 4-thread overlock ・[Parts List]
EG007 ・[Directions]5-thread overlock ・[Parts List]
EG008 ・[Directions] Equipped with piping tape folder ・[Parts List]
  • Elastic Feeding Device

EF

Directions Main Shaft Motor Application Parts List
EF006 ・[Directions]EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape. ・[Main Shaft Motor]Bottom mounted ・[Application]UH9000F ・[Parts List]
EF007 ・[Directions]EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape. ・[Main Shaft Motor]Direct drive ・[Application]UHD9000F ・[Parts List]
EF016 ・[Directions]EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape. ・[Main Shaft Motor]Bottom mounted ・[Application]UH9383 ・[Parts List]
EF017 ・[Directions]EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape. ・[Main Shaft Motor]Direct drive ・[Application]UHD9383 ・[Parts List]
  • Tape Binder

TB

Description Application Parts List
TB005 ・[Description]Applicable to bulky sweater sewing, equipped with wide knife and tape rack. ・[Application]UH9094F, UHD9094F ・[Parts List]
TB006 ・[Description]Applicable to normal knits fabric, for T shirt or Polo shirt’s shoulder firming. ・[Application]UH9004F-243E-M14, UHD9004F-243E-M14 ・[Parts List]
  • Angled Knife

AG

Description Knife Type Application Parts List
AG005 ・[Description]Applicable to heavy material. Corrugated blade with 10 m.m. width ・[Knife Type]Wide Flat Type ・[Application]3/ 4-thread Overlock ・[Parts List]
AG006 ・[Description]Applicable to heavy material. Corrugated blade with 10 m.m. width ・[Knife Type]Wide Flat Type ・[Application]5-thread Overlock ・[Parts List]
AG007 ・[Description]Applicable to heavy material. Corrugated blade with 10 m.m. width ・[Knife Type]Angled Knife ・[Application]3/ 4-thread Overlock ・[Parts List]
AG008 ・[Description]Applicable to heavy material. Corrugated blade with 10 m.m. width ・[Knife Type]Angled Knife ・[Application]5-thread Overlock ・[Parts List]
  • Fully-Submerged Installation Kit

FS

Picture Directions Application Parts List
FS ・[Picture] ・[Directions]To make the machine lower so that the sewing bed and the table are on the same surface. ・[Application]UH9000F, UHD9000F, UHF9000, UHU9000 ・[Parts List]
  • Simple Type Auto Back Latch

SBL

Picture Directions Application Parts List
SBL ・[Picture] ・[Directions]The needle plate tongue is the air suction channel. At the end of sewing, the thread chain is cut and then get into the air suction channel, which makes back latch function. ・[Application]UHD9023F-032-M04
UHD9023F-052-M04
UHD9024F-242-M14		 ・[Parts List]
  • Tape Cutter Device

TC

Description Application Parts List
TC021H,
TC021K,
TC022H,
TC022K,
TC022S 		・[Description]The knife is installed behind the needle plate. At the end of sewing, TC device cuts the tape or thread chain. Many product packages are available with sensors, manual switch, knee switch, pneumatic and solenoid type actuator..., etc. ・[Application]UH9000F, UHD9000F, UHF9000, UHU9000 ・[Parts List]
TC023H,
TC023K,
TC023S,
TC024H,
TC024K,
TC024S 		・[Description]The knife is installed behind the needle plate. At the end of sewing, TC device cuts the tape or thread chain. Many product packages are available with sensors, manual switch, knee switch, pneumatic and solenoid type actuator..., etc. ・[Application]UH9000F, UHD9000F, UHF9000, UHU9000 ・[Parts List]
  • Tape Feeding Device

TF□

TF□ Picture Directions width(Max) Application
TFU ・[Picture]Top-deeding type ・[Directions]Ensure that the tap (elastic or knitted fabric) is tension-free before it enters the tension control device. ・[width(Max)]70mm ・[Application] UH9004-243E, UH9083, UH9084, UH9094, FT7069, FT7002
TFS ・[Picture]Side-feeding type ・[Directions]Ensure that the tap (elastic or knitted fabric) is tension-free before it enters the tension control device. ・[width(Max)]70mm ・[Application] UH9055, UH9075, FT7003, CT9003
  • Pneumatic Presser Foot Pressure Regulator

AP□

AP Picture Directions Application Parts List
AP016, AP017 ・[Picture] ・[Directions]With the air pressure valve, the pressure value is done by digital setting. When sewing across the material thickness changing, the pressure keeps constant. ・[Application]AP016:UHD9000F
AP017:UHD9300, UHU9000, UHU9300		 ・[Parts List]AP016
AP017
AP16A, AP17A ・[Picture] ・[Directions]With the air pressure valve, the pressure value is done by digital setting. When sewing across the material thickness changing, the pressure keeps constant. ・[Application]AP16A:UH9000F, UHD9000F
AP17A:UH9300, UHD9300, UHF9000, UHF9300, UHU9000, UHU9300		 ・[Parts List]AP16A
AP17A

Related products

0
Basic-Overlock
0
Basic-Overlock
1
Blind Stitch Hemming
2
Back Latching
Back..