Tubular Extending Roller Set
Tubular Extending Roller Set
TR
Crew Collar Sewing Guider/ Tubular Extending Roller Set
TR021
(With TR019)
Pneumatic fabric guide, which is controlled by knee switch. Before the end of sewing, the guide is pulled off and the ring type sewing can be finished.
Crew Collar Sewing Guider/ Tubular Extending Roller Set
TR025
(With TR019)
Pneumatic fabric guide, which is controlled by knee switch. Before the end of sewing, the guide is pulled off and the ring type sewing can be finished.
Ribbed Cuff Attaching/ Tubular Extending Roller Set
TR037
Pneumatic tubular extending roller pulls downward during sewing. At the end of sewing, thread releasing, trimming, and material unloading are done automatically.
Elastic Band Joining/ Tubular Extending Roller Set
TR030
Pneumatic tubular extending roller, with UHD9022F/BL 2-thread overlock, pulls left during elastic band ring length measuring. Before sewing, the ring is released without tension.
Suction Type Thread Chain Trimmer Set
SS
SS033
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Side Suction Type 3, 4-thread overlock
- Application ：UH9000 UHD9000
SS034
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Side Suction Type 3, 4-thread overlock
- Application ：UH9000 UHD9000
SS037
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Side Suction Type 3, 4-thread overlock
- Application ：UHU9000 UHU9100 UHF9000 UHF9100
SS038
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Side Suction Type 3, 4-thread overlock
- Application ：UHF9300 UHU9300
SS051
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Side Suction Type 3, 4-thread overlock
- Application ：UHD9022F UHD9024F
Suction Type Thread Chain Trimmer Set
US
US040
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Under Suction Type 5, 6-thread overlock, thick fabric is more suitable
- Application ：UH9000 UHD900
US041
- Connected to air compressor via CV set, the air suction makes the thread chain entered and then be cut. Under Suction Type 5, 6-thread overlock, thick fabric is more suitable
- Application ：UHU9000 UHU9100 UHF9000 UHF9100
Central Venturi Device Set(Mechanical Valve)
CV
Connected to air compressor, controlled by motor pedal. Step forward to sew and to make front and rear air suction. Step backward to raise the presser foot.
- Front Suction: fabric waste
- Rear Suction: thread trimmer
- Presser foot lifter
| Item No. | Pedal Connection | Front Suction | Rear Suction | Foot Lifter | Application Model UH9000 | Application Model UHF9000 | Application Model UH9300 | Application Model UHF9300 | Parts List |
|---|---|---|---|---|---|---|---|---|---|
| CV08A | Mechanical Valve + Clutch Motor | ✓ | ● | ● | ● | ● |  |
||
| CV08B | ✓ | ✓ | ● | ● | |
||||
| CV28B | ✓ | ✓ | ✓ | ● | ● | |
|||
| CV08C | ✓ | ✓ | ● | ● | |
||||
| CV38C | ✓ | ✓ | ● | ● | |
||||
| CV08D | ✓ | ✓ | ✓ | ● | |
||||
| CV28D | ✓ | ✓ | ✓ | ● | ● | |
|||
| CV38D | ✓ | ✓ | ✓ | |
|||||
| CV48D | ✓ | ✓ | ✓ | ● | |
||||
| CVO8E | ✓ | ● | ● | |
|||||
| CV38E | ✓ | ● | ● | |
|||||
| CV08K | ✓ | ● | ● | |
|||||
| CV28K | ✓ | ● | ● | |
Central Venturi Device Set(Solenoid Valve)
CV
Connected to air compressor, controlled by motor pedal. Step forward to sew and to make front and rear air suction. Step backward to raise the presser foot.
- Front Suction: fabric waste
- Rear Suction: thread trimmer
- Presser foot lifter
| Item No. | Pedal Connection | Front Suction | Rear Suction | Foot Lifter | Application Model UHD9000F | Application ModelUH9000 | Application ModelUHF9000 | Application ModelUH9300 | Application ModelUHF9300 | Parts List |
|---|---|---|---|---|---|---|---|---|---|---|
| CVO8E-3 | Solenoid Valve + Servo Motor Speed Controller | ✓ | ● | ● |  |
|||||
| CV58E-3 | ✓ | ● | ● | |
||||||
| CV08F-2 | ✓ | ✓ | ✓ | ● | |
|||||
| CV28F-2 | ✓ | ✓ | ✓ | ● | |
|||||
| CV58F-2 | ✓ | ✓ | ✓ | ● | ● | |
||||
| CV68F-2 | ✓ | ✓ | ● | ● | |
|||||
| CVO8G-2 | ✓ | ✓ | ● | ● | |
|||||
| CV28G-2 | ✓ | ✓ | ● | ● | |
|||||
| CV08H-2 | ✓ | ✓ | ● | ● | |
|||||
| CV58H-2 | ✓ | ✓ | ● | ● | |
|||||
| CV08I-2 | ✓ | ● | ● | ● | ● | |
||||
| CVO8M-2 | ✓ | ● | ● | |
||||||
| CV28M-2 | ✓ | ● | ● | |
鬆線器
BL
- BL073(3-thread) BL074(4-thread)
- Connected to presser foot lifter lever. As pushing the pedal, the thread tension nut is opened, and the needle thread is released.
- Application：UH (3-thread)/UH (4-thread
Back Latch Device
BT
BT084
- At the beginning of sewing, wrap the pre-clamped thread end into the bottom of the overlock seam. At the end of sewing, pull the thread end into BT device to cut and clamp the thread end. BT084 and BT086 are optional for different sewing gestures.
- Application：UH
BT086
- At the beginning of sewing, wrap the pre-clamped thread end into the bottom of the overlock seam. At the end of sewing, pull the thread end into BT device to cut and clamp the thread end. BT084 and BT086 are optional for different sewing gestures.
- Application：UH
Pocket Tape Binding Device
BD
BD081
- Description：Casual or Jeans’ pocket
- Stitch：Stitch 516
- Application：UH9055F UHD9055F
- Tape Folder Entering Width：Openong 30mm, 25mm 。 Finishing 6.4mm。
Gathering Device
GC
GC060
- Description：Shirring device GC060 presses the lower fabric to increase feeding, which makes the upper fabric flat, and the lower fabric is irregularly wrinkled.
- Application：UH9044 UHD9044F UH9045 UHD9045F
GC061 GC061A
- Description：Shirring device GC061, GC061A presses the lower fabric to increase feeding, which makes the upper fabric flat, and the lower fabric is irregularly wrinkled.。
- Application：UH9074F UH9074 UHD9074F UHD9074 UH9075F UH9075 UHD9075F UHD9075
Edge Guide Device
EG
Elastic Feeding Device
EF
EF006
- Main Shaft Motor：Bottom mounted
- Application：UH9000
- Description：EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape.
EF007
- Main Shaft Motor：Direct drive
- Application：UHD9000
- Description：EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape.
EF016
- Main Shaft Motor：Bottom mounted
- Application：UH9383
- Description：EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape.
EF017
- Main Shaft Motor：Direct drive
- Application：UHD9383
- Description：EF device connects to main shaft by the belt. By adjusting the gear box, we get a proper tape feeding amount for setting the tension of elastic tape.
Tape Binder
TB
TB005
- Description：Applicable to bulky sweater sewing, equipped with wide knife and tape rack.
TB006
- Description：Applicable to normal knits fabric, for T shirt or Polo shirt’s shoulder firming.
Angled Knife
AG
AG005
- Knife Type：Wide Flat Type
- Application：3/ 4-thread Overlock
- Description：Applicable to heavy material. Corrugated blade with 10 m.m. width
AG006
- Knife Type：Wide Flat Type
- Application：5-thread Overlock
- Description：Applicable to heavy material. Corrugated blade with 10 m.m. width
AG007
- Knife Type：Angled Knife
- Application：3/ 4-thread Overlock
- Description：Applicable to heavy material. Corrugated blade with 10 m.m. width
AG008
- Knife Type：Angled Knife
- Application：5-thread Overlock
- Description：Applicable to heavy material. Corrugated blade with 10 m.m. width
Fully-Submerged Installation Kit
FS
- To make the machine lower so that the sewing bed and the table are on the same surface.
Simple Type Auto Back Latch
SBL
- The needle plate tongue is the air suction channel. At the end of sewing, the thread chain is cut and then get into the air suction channel, which makes back latch function.
Tape Cutter Device
TC
TC021H, TC021K, TC022H, TC022K, TC022S
- Application：UH9000F, UHD9000F, UHF9000, UHU9000
- Description：The knife is installed behind the needle plate. At the end of sewing, TC device cuts the tape or thread chain. Many product packages are available with sensors, manual switch, knee switch, pneumatic and solenoid type actuator..., etc.
TC023H, TC023K, TC023S, TC024H, TC024K, TC024S
- Application：UH9000F, UHD9000F, UHF9000, UHU9000
- Description：The knife is installed behind the needle plate. At the end of sewing, TC device cuts the tape or thread chain. Many product packages are available with sensors, manual switch, knee switch, pneumatic and solenoid type actuator..., etc.
Tape Feeding Device
TF□
TFU
- Application：UH9004-243E, UH9083, UH9084, UH9094, FT7069, FT7002
- width(Max)：70mm
- Description：Ensure that the tap (elastic or knitted fabric) is tension-free before it enters the tension control device.
TFS
- Application：UH9055, UH9075, FT7003, CT9003
- width(Max)：70mm
- Description：Ensure that the tap (elastic or knitted fabric) is tension-free before it enters the tension control device.
Pneumatic Presser Foot Pressure Regulator
AP016
- Applicatio：UHD9000F
- Description：With the air pressure valve, the pressure value is done by digital setting. When sewing across the material thickness changing, the pressure keeps constant.
AP16A
- Applicatio：UHD9300/UHU9000/UHU9300
- Description：With the air pressure valve, the pressure value is done by digital setting. When sewing across the material thickness changing, the pressure keeps constant.
