MENU
MENU
Home/products/Interlock/FT/ FTD / FTU series/FT7000, FTD7000/Flat Bed Interlock_Optional Device

Flat Bed Interlock_Optional Device

  • Pneumatic Presser Foot Pressure Regulator

AP014, AP14A

AP picture Directions Application Parts List
AP014 ・[picture] ・[Directions] With the air pressure valve, the pressure value is done by digital setting. When sewing across the material thickness changing, the pressure keeps constant. ・[Application]FTD7000 ・[Parts List]
AP14A ・[picture] ・[Directions] With the air pressure valve, the pressure value is done by digital setting. When sewing across the material thickness changing, the pressure keeps constant. ・[Application]FTD7000 ・[Parts List]
  • Under-bed Suction Chain Cutter

KI002

Picture Picture Directions Application Parts List
KI002 ・[picture] ・[picture] ・[directions]With suction motor or air compressor, the thread chain is sucked into the cutter slot and cut off. The specially designed needle plate is mbedded with the cutter set. When the sewing is finished, the thread chain is sucked into the cutter immediately, which is easy to operate and highly efficient, and greatly saves thread consumption. ・[Application]FTD7000 ・[Parts List]
  • Reflective type Sensor for Fabric Edge

SE005, SE006

Picture Directions Application Parts List
SE005
SE006 		・[picture] ・[directions]The various bracket sets for the various positions of the different sewing applications. ・[Application]SE005 : FTD7069
SE006 : FTD7000		 ・[零件冊]SE005
SE006
  • Tape Binder

TB

TB Picture Directions Application Parts List
TB002 ・[picture] ・[Directions]Using Pre-Cut Strip Tapes, Fast Continuous Seaming Can Be Achieved Easily. Using Convenient Adjustable Bracket, Suitable or Different Kinds Of Sewing Requirement. ・[Application] CT, FT ・[Parts List]
TB003 ・[picture] ・[Directions]Can Sew Pre-Cut Tapes Fast And Easily Into Belt Loop. ・[Application] CT, FT ・[Parts List]
  • Tape Cutter Device

TC

TC
TCS		 Picture Cutting Width Blade to Presser foot Actuation Needle Plate Application Parts List
TC001,
TC004,
TCS01,
TCS04, 		・[Picture] ・[Cutting Width]32mm ・[Blade to Presser foot]31.9mm ・[Actuation ]Pneumatic ・[Needle Plate]Standard needle plate ・[Application] TC001/ TCS01 : FT7003, FTD7003, FTU7003 TC004/ TCS04 : FT7069, FTD7069 ・[Parts List]
TC002,
TC005,
TCS02,
TCS05, 		・[Picture] ・[Cutting Width]32mm ・[Blade to Presser foot]31.9mm ・[Actuation ]Electric ・[Needle Plate]Standard needle plate ・[Application] TC002/ TCS02 : FT7003, FTD7003, FTU7003 TC005/ TCS05 : FT7069, FTD7069 ・[Parts List]
TC003,
TCS03, 		・[Picture] ・[Cutting Width]28mm ・[Blade to Presser foot]5.3mm ・[Actuation ]Pneumatic ・[Needle Plate] ・[Application] (356,364): FT7003, FTD7003, FTU7003 ・[Parts List]
TC008,
TCS08, 		・[Picture] ・[Cutting Width]28mm ・[Blade to Presser foot]11mm ・[Actuation ]Pneumatic ・[Needle Plate] ・[Application] FT7002, FTD7002 ・[Parts List]
TC009,
TC019,
TCS09,
TCS19 		・[Picture] ・[Cutting Width]28mm ・[Blade to Presser foot]12.3mm ・[Actuation ]Pneumatic ・[Needle Plate]
 ・[Application] TC009/TCS09 : FT□7003, FT□7069-0, FT□7069-2 FT□7069-4, FTD7069-6 TC019/TCS19 : FT□7069-3, FT□7069-5 FTD7069-7 ・[Parts List]
TCS33 ・[Picture] ・[Cutting Width]28mm ・[Blade to Presser foot]25mm ・[Actuation ]Pneumatic ・[Needle Plate]Standard needle plate ・[Application] FT7000, FTD7000
Top mounted type moving knife makes sewing area free without obstacal.		 ・[Parts List]
Pneumatic : Compressed air is required(5kg/ cm2 或 70 PSI)
TCS series is controlled by servo motor controller
TC series is equipped with the independent controller
  • Tape Stand

TS

TS Directions Application Parts List
TS003 ・[Directions]Top feeding ・[Application] FTD7002, FTD7069, CT9003 ・[Parts List]
TS005 ・[Directions]Side feeding ・[Application] FTD7003 ・[Parts List]
TS008 ・[Directions]Side feeding (with guide post) ・[Application] FTD7003, CTD9003, CXM20A3 ・[Parts List]
TS010 ・[Directions]Bottom feeding with tape folder ・[Application] FTD7003 ・[Parts List]
  • Tape Feeding Device

TF□

TF□ Picture Description width(Max) Application
TFU ・[Picture]top-feeding type ・[Description]Ensure that the tap (elastic or knitted fabric) is tension-free before it enters the tension control device. ・[width(Max)]70mm ・[Application] UH9004-243E, UH9083, UH9084, UH9094, FT7069, FT7002
TFS ・[圖]side-feeding type ・[Description]Ensure that the tap (elastic or knitted fabric) is tension-free before it enters the tension control device. ・[width(Max)]70mm ・[Application] UH9055, UH9075, FT7003, CT9003
  • External Direct-drive Servo Motor

R

R Picture Directions Application
R ・[Picture] ・[Directions]can be installed with external direct-drive servo motor, needle- positioning type. ・[Application] FT7000 series
R ・[Picture] ・[Directions]can be installed with external direct-drive servo motor, auto thread trimming type are optional. ・[Application] FT7000 series

Related products

11
Hemming
X11
Hemming / Left Trimme
13
Covering
60
4-Needle 6-Thread Flatseaming
Back..