Application Description :
- 2-Side Trimming Flatseaming
- When overlapping the 2 trimmed fabric ply, due to the fabric conditions (thickness, elasticity…, etc.), corresponding presser foot grooves, shoes, tongues, blades, lap ormer…, etc. are required to make the sewing smooth.
-
*448-gauge old type needle holder needs to be used special needle.
448 Specification:
FL x 118GCS 10/70 Ø 1.4
Retainer: FLG-2 8/60 Ø 1.4 -
*448-gauge new type needle holder is applicable to standard needle.
FL x 118GCS
Retainer: FLG-8 - 12□ as follows:
item Description picturew 12-M Light to Medium - 12F-M Fine materials - 12-H Medium to heavy,
brief crotch joining over the tape binding
12A-H Brief crotch joining over the tape binding with elastic inside 12-S Stockings, slippery, curly-edge, elastic materials 
12E-H Heavy fleece & brushed thermals
(5~8mm)
12G-M Light to Medium,
with double covering stitch
| 12 |  |
 |
 |
 |
 |
 |
 |
Fabric Thickness | Presser Foot Groove | Blade Width |  |
Optional Device |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NTD6712-M5 | 5:5.2 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | M | M | M | 4200 | TC012 TC112 |
| NTD6712-M6 | 6:6.0 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 6 | 30 | M | M | M | 4200 | |||
| NTD6712-M356 | 356 : 5.6 |
FL x 118GCS
Retainer: FLG-8 3
|
5.6 | 6 | 30 | M | M | M | 4200 | |||
| NTD6712-M448 | *448 : 4.8 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 6 | 30 | M | M | M | 4200 | |||
| NTD6712F-M5 | 5:5.2 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | F | M | M | 4200 | TC012 TC112 |
| NTD6712-S5 | 5:5.2 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | S | M | H | 4200 | TC012 TC112 |
| NTD6712-S6 | 6:6.0 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 6 | 30 | S | M | H | 4200 | |||
| NTD6712-S356 | 356 : 5.6 |
FL x 118GCS
Retainer: FLG-8 3
|
5.6 | 6 | 30 | S | M | H | 4200 | |||
| NTD6712-S448 | *448 : 4.8 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 6 | 30 | S | M | H | 4200 | |||
| NTD6712-H5 | 5:5.2 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | H | H | H | 4200 | TC012 TC112 |
| NTD6712-H6 | 6:6.0 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 6 | 30 | H | H | H | 4200 | |||
| NTD6712-AH5 | 5:5.2 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | H+ | H+ | H | 4200 | TC012 TC112 |
| NTD6712-AH6 | 6:6.0 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 6 | 30 | H+ | H+ | H | 4200 | |||
| NTD6712-EH6 | 6:6.0 |
FL x 118GCS
Retainer: FLG-8 4
|
6 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | H++ | H++ | H | 4200 | TC012 TC112 |
| NTD6712G-M5 | 5:5.2 |
FL x 118GCS
Retainer: FLG-8 4
|
7 | 1.6~2.5 |
1:0.7~1:1.5 |
6 | 30 | M | M | H | 4200 | TC012 TC112 |
| NTD6712G-M6 | 6:6.0 |
FL x 118GCS
Retainer: FLG-8 4
|
7 | 6 | 30 | M | M | H | 4200 |
Blade Width: M= Standard, H=Wide
Seam Diagram
| Subclass | Trimming | Finish | Reference |
|---|---|---|---|
| 12-M 12-H 12A-H 12E-H 12F-M 12-S |
 |
 |
 |
| 12G-M | |
 |
- |
Optional Device
AL013B
PFE06
TC