- Presser Foot Lifter
PFE
| PFE□ | Picture | Presser Foot Lifter | Directions | Application | Parts List |
|---|---|---|---|---|---|
| PFE06 | ・[Picture] |
・[Presser Foot Lifter]Solenoid Type | ・[Directions] NT/ NTD 67 series presser foot lifter is on the top of the machine | ・[Application]NT67, NTD67 | ・[Parts List] |
| PFE07 | ・[Picture] |
・[Presser Foot Lifter]Solenoid Type | ・[Directions]NTD 77 series presser foot lifter is integrated into the machine base. | ・[Application]NTD77 | ・[Parts List] |
AL
| AL□ | Picture | Presser Foot Lifter | Directions | Application | Parts List |
|---|---|---|---|---|---|
| AL013 | ・[Picture] |
・[Presser Foot Lifter]pneumatic type | ・[Directions]NT/ NTD 67 series presser foot lifter is on the top of the machine. | ・[Application]NT67, NTD67 | ・[Parts List] |
| AL018 | ・[Picture] |
・[Presser Foot Lifter]pneumatic type | ・[Directions] NTD 77 series presser foot lifter is integrated into the machine base. | ・[Application]NTD77 | ・[Parts List] |
AP
| AP□ | Picture | Presser Foot Lifter | Directions | Application | Parts List |
|---|---|---|---|---|---|
| AP019, AP19A | ・[Picture]  AP019 AP19A |
・[Presser Foot Lifter]pneumatic type | ・[Directions]Pneumatic type presser foot lifter with pressure regulator, which the presser foot pressure keeps constant during sewing no matter the material thickness changing. | ・[Application]NTD67, NTD77 | ・[Parts List]AP019AP19A |
- NTD67 Tape (Thread) Cutter
TC
| TC | Cutter Type | Air Cylinder | Waste Suction | CV Set | Cutter Switch | Sensor | Servo Motor | Parts List |
|---|---|---|---|---|---|---|---|---|
| TC012E | ・[ Cutter Type]Punch type(with Blade) | ・[Air Cylinder]Round type | ・[Waste Suction] - | ・[CV Set] CV015, CV016 | ・[Cutter Switch] Hand touch | ・[Sensor] - | ・[Servo Motor] TD715 | ・[Parts List]
|
| TC012K | ・[ Cutter Type]Punch type(with Blade) | ・[Air Cylinder]Round type | ・[Waste Suction] - | ・[CV Set] CV015, CV016 | ・[Cutter Switch] Knee touch | ・[Sensor] - | ・[Servo Motor] TD715 | ・[Parts List]
|
| TC012S | ・[ Cutter Type]Punch type(with Blade) | ・[Air Cylinder]Round type | ・[Waste Suction]Rear type | ・[CV Set] CV022 | ・[Cutter Switch] Hand/ Knee touch | ・[Sensor] ● | ・[Servo Motor] i-70 | ・[Parts List]
|
| TC112E | ・[ Cutter Type]Punch type | ・[Air Cylinder]Round type | ・[Waste Suction] - | ・[CV Set] CV015, CV016 | ・[Cutter Switch] Hand touch | ・[Sensor] - | ・[Servo Motor] TD715 | ・[Parts List]
|
| TC112K | ・[ Cutter Type]Punch type | ・[Air Cylinder]Round type | ・[Waste Suction] - | ・[CV Set] CV015, CV016 | ・[Cutter Switch] Knee touch | ・[Sensor] - | ・[Servo Motor] TD715 | ・[Parts List]
|
 TC112S
|
・[ Cutter Type]Punch type | ・[Air Cylinder]Round type | ・[Waste Suction]Bottom type | ・[CV Set] CV022 | ・[Cutter Switch] Hand/ Knee touch | ・[Sensor] ● | ・[Servo Motor] i-70 | ・[Parts List]
|
• As Punchtype cutter, the presser foot can be removed directly without removing the cutter in advance,
which is suitable for the garment factories that frequently adjust machines for style changing.
• The bottom suction tube can free up the rear space to avoid jamming behind the cutter. It is suitable for NTD 6703 (tape attaching), but it will increase the circumference of the arm-bed.
• CV015 has a standard pipe diameter of Ø19 and is suitable for general fabrics. CV016 has an enlarged pipe diameter of Ø25 and is suitable for thick fabrics.
• The bottom suction tube can free up the rear space to avoid jamming behind the cutter. It is suitable for NTD 6703 (tape attaching), but it will increase the circumference of the arm-bed.
• CV015 has a standard pipe diameter of Ø19 and is suitable for general fabrics. CV016 has an enlarged pipe diameter of Ø25 and is suitable for thick fabrics.
斬刀/ 下吸
斬刀/ 後吸
| TC | Cutter Type | Air Cylinder | Waste Suction | CV Set | Cutter Switch | Sensor | Servo Motor | Parts List |
|---|---|---|---|---|---|---|---|---|
| TC013E | ・[ Cutter Type]Chop type | ・[Air Cylinder]Square type | ・[Waste Suction] - | ・[CV Set] CV015, CV016 | ・[Cutter Switch] Hand touch | ・[Sensor] - | ・[Servo Motor] TD715 | ・[Parts List]
|
| TC013K | ・[ Cutter Type]Chop type | ・[Air Cylinder] Square type | ・[Waste Suction] - | ・[CV Set] CV015, CV016 | ・[Cutter Switch] Knee touch | ・[Sensor] - | ・[Servo Motor] TD715 | ・[Parts List]
|
| TC013S | ・[ Cutter Type]Chop type | ・[Air Cylinder] Square type | ・[Waste Suction]Rear type | ・[CV Set] CV022 | ・[Cutter Switch] Hand/ Knee touch | ・[Sensor] ● | ・[Servo Motor] i-70 | ・[Parts List]
|
| TC113S | ・[ Cutter Type]Chop type | ・[Air Cylinder] Square type | ・[Waste Suction] Bottom type | ・[CV Set] CV022 | ・[Cutter Switch] Hand/ Knee touch | ・[Sensor] ● | ・[Servo Motor] i-70 | ・[Parts List]
|
| TC014S | ・[ Cutter Type]Chop type Moving knife with spring-pressed | ・[Air Cylinder] Square type | ・[Waste Suction] Rear type | ・[CV Set] CV022 | ・[Cutter Switch] Hand/ Knee touch | ・[Sensor]● | ・[Servo Motor] i-70 | ・[Parts List]
|
| TC024S | ・[ Cutter Type]Chop type Moving knife with spring-pressed | ・[Air Cylinder]Square type | ・[Waste Suction] Rear type | ・[CV Set] CV022 | ・[Cutter Switch] Hand/ Knee touch | ・[Sensor]● | ・[Servo Motor] i-70 | ・[Parts List]
|
• The bottom suction tube can free up the rear space to avoid jamming behind the cutter. It is suitable for NTD 6703 (tape attaching), but it will increase the circumference of the arm-bed.
• CV015 has a standard pipe diameter of Ø19 and is suitable for general fabrics. CV016 has an enlarged pipe diameter of Ø25 and is suitable for thick fabrics.
• TC 024S is the same as TC 014S, only the side cover fixing plate is different.
• CV015 has a standard pipe diameter of Ø19 and is suitable for general fabrics. CV016 has an enlarged pipe diameter of Ø25 and is suitable for thick fabrics.
• TC 024S is the same as TC 014S, only the side cover fixing plate is different.
- NTD77 Tape (Thread) Cutter
TC
| TC | Cutter Type | Actuator | Waste Suction | CV Set | Cutter Switch | Sensor | Press Foot Lifter | Parts List |
|---|---|---|---|---|---|---|---|---|
| TC026A | ・[ Cutter Type]Punch type | ・[Actuator]Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Pneumatic | ・[Parts List]
|
| TC026AS | ・[ Cutter Type]Punch type | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Pneumatic | ・[Parts List]
|
| TC026B | ・[ Cutter Type]Punch type | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
| TC026BS | ・[ Cutter Type]Punch type | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
| TC027A | ・[ Cutter Type]Punch type (with Blade) | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Pneumatic | ・[Parts List]
|
| TC027AS | ・[ Cutter Type]Punch type (with Blade) | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Pneumatic | ・[Parts List]
|
| TC027B | ・[ Cutter Type]Punch type (with Blade) | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
| TC027BS | ・[ Cutter Type]Punch type (with Blade) | ・[Actuator] Air Cylinder (Round) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
Remark：
• As Punchtype cutter, the presser foot can be removed directly without removing the cutter in advance, which is suitable for the garment factories that frequently adjust machines for style changing.
• Tape Cutting isrecommended to use TC027 punch type with blade, or TC028A pneumatic type chopping cutter, for better efficiency.
• As Punchtype cutter, the presser foot can be removed directly without removing the cutter in advance, which is suitable for the garment factories that frequently adjust machines for style changing.
• Tape Cutting isrecommended to use TC027 punch type with blade, or TC028A pneumatic type chopping cutter, for better efficiency.
氣動式/ 斬刀
| TC | Cutter Type | Actuator | Waste Suction | CV Set | Cutter Switch | Sensor | Press Foot Lifter | Parts List |
|---|---|---|---|---|---|---|---|---|
| TC028A | ・[ Cutter Type]Chop type | ・[Actuator] Air Cylinder (Square) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Pneumatic | ・[Parts List]
|
|
TC028AS
|
・[ Cutter Type]Chop type | ・[Actuator] Air Cylinder (Square) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Pneumatic | ・[Parts List]
|
| TC028B | ・[ Cutter Type]Chop type | ・[Actuator] Air Cylinder (Square) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
| TC028BS | ・[ Cutter Type]Chop type | ・[Actuator] Air Cylinder (Square) | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
| TC028C | ・[ Cutter Type]Chop type | ・[Actuator] Solenoid | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] - | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
|
TC028CS
|
・[ Cutter Type]Chop type | ・[Actuator] Solenoid | ・[Waste Suction] Rear type | ・[CV Set] CV023 | ・[Cutter Switch] Hand Touch, Optional: Knee control kit | ・[Sensor] ● | ・[Press Foot Lifter] Solenoid | ・[Parts List]
|
Remark：
• As Punchtype cutter, the presser foot can be removed directly without removing the cutter in advance, which is suitable for the garment factories that frequently adjust machines for style changing.
• Tape Cutting isrecommended to use TC027 punch type with blade, or TC028A pneumatic type chopping cutter, for better efficiency.
• As Punchtype cutter, the presser foot can be removed directly without removing the cutter in advance, which is suitable for the garment factories that frequently adjust machines for style changing.
• Tape Cutting isrecommended to use TC027 punch type with blade, or TC028A pneumatic type chopping cutter, for better efficiency.
- General Type Rear Cutter
TCA
| TC | Picture | Cutter Type | Air Cylinder | Waste Suction | CV Set | Cutter Switch | Sensor | Servo Motor | Application |
|---|---|---|---|---|---|---|---|---|---|
|
TCA67 TCA77 TCA80 |
・[ Picture]  |
・[ Cutter Type]Chop type Moving knife with spring-pressed | ・[Air Cylinder] Square type | ・[Waste Suction] Rear type | ・[CV Set] Standard | ・[Cutter Switch] Pedal: Heeling backward | ・[Sensor]● | ・[Servo Motor] TD415 | ・[Application]TCA67:NTD67 TCA77:NTD77 TCA80:NTD80 |
Remark：
TCA cutter set features a modular design and is compatible with the full range of NTD 67/77/80 series.
In manual mode, the cutter is controlled by pressing the rear of the foot pedal.
Supports automatic mode, with fabric edge detection sensor as standard equipment.
TCA cutter set features a modular design and is compatible with the full range of NTD 67/77/80 series.
In manual mode, the cutter is controlled by pressing the rear of the foot pedal.
Supports automatic mode, with fabric edge detection sensor as standard equipment.
- Stepping Motor Type Presser Foot Lifter and Rear Cutter
SLC
Driven by the stepping motor, the presser foot and rear cutter operate with precision, quietly and smoothly.
